TXR-HF4補償導線特點分析

ZR-EX-HS-FPVRP、ZR-EX-HA-FPVPR、ZR-EX-HB-FPVPR、ZR-EX-HS-FPVPR、ZR-EX-HA-FPV、ZR-EX-HB-FPV、ZR-EX-HS-FPV、ZR-EX-HA-FP2VP2、ZR-EX-HB-FP2VP2、ZR-EX-HS-FP2VP2、ZR-EX-HA-FP2VRP2、ZR-EX-HB-FP2VRP2、ZR-EX-HS-FP2VRP2、ZR-EX-HA-FP2VP2R、ZR-EX-HB-FP2VP2R、ZR-EX-HS-FP2VP2R、ZR-EX-HA-FP2V、ZR-EX-HB-FP2V、ZR-EX-HS-FP2V、ZR-EX-HA-FPVR、ZR-EX-HB-FPVR、ZR-EX-HS-FPVR、ZR-EX-HA-FPFP、ZR-EX-HB-FPFP、ZR-EX-HS-FPFP、ZR-EX-HA-FPFRP、ZR-EX-HB-FPFRP、ZR-EX-HS-FPFRP、ZR-EX-HA-FPFPR、ZR-KX-HB-FPFPR、ZR-EX-HS-FPFPR、ZR-EX-HA-FPF、ZR-EX-HB-FPF、ZR-EX-HS-FPF、ZR-EX-HA-FP2FP2、ZR-EX-HB-FP2FP2、ZR-EX-HS-FP2FP2、ZR-EX-HA-FP2FRP2、ZR-EX-HB-FP2FRP2、ZR-EX-HS-FP2FRP2、ZR-EX-HA-FP2FP2R、ZR-EX-HB-FP2FP2R、ZR-EX-HS-FP2FP2R、ZR-EX-HA-FP2F、ZR-EX-HB-FP2F、ZR-EX-HS-FP2F、ZR-EX-HA-FPFR、ZR-EX-HB-FPFR、ZR-EX-HS-FPFR、ZR-JX-HA-FPVP、ZR-JX-HB-FPVP、ZR-JX-HS-FPVP、ZR-JX-HA-FPVRP、ZR-JX-HB-FPVRP、ZR-JX-HS-FPVRP、ZR-JX-HA-FPVPR、ZR-JX-HB-FPVPR、ZR-JX-HS-FPVPR、ZR-JX-HA-FPV、ZR-JX-HB-FPV、ZR-JX-HS-FPV、ZR-JX-HA-FP2VP2、ZR-JX-HB-FP2VP2、ZR-JX-HS-FP2VP2、ZR-JX-HA-FP2VRP2、ZR-JX-HB-FP2VRP2、ZR-JX-HS-FP2VRP2、ZR-JX-HA-FP2VP2R、ZR-JX-HB-FP2VP2R、ZR-JX-HS-FP2VP2R、ZR-JX-HA-FP2V、ZR-JX-HB-FP2V、ZR-JX-HS-FP2V、ZR-JX-HA-FPVR、ZR-KX-HB-FPVR、ZR-JX-HS-FPVR、ZR-JX-HA-FPFP、ZR-JX-HB-FPFP、ZR-JX-HS-FPFP、ZR-JX-HA-FPFRP、ZR-JX-HB-FPFRP、ZR-JX-HS-FPFRP、ZR-JX-HA-FPFPR、ZR-JX-HB-FPFPR、ZR-JX-HS-FPFPR、ZR-JX-HA-FPF、ZR-JX-HB-FPF、ZR-JX-HS-FPF、ZR-JX-HA-FP2FP2、ZR-JX-HB-FP2FP2、ZR-JX-HS-FP2FP2、ZR-JX-HA-FP2FRP2、ZR-JX-HB-FP2FRP2

在實際應用中常把熱電偶的參比端稱為冷端。TXR-HF4補償導線特點分析
熱電偶冷端溫度補償?shù)姆椒ㄓ?．冰浴法常用在實驗室，即把參比端溫度恒定在0度，但做起來成本高、難度大。
2．冷端溫度校正法常用在要求不高的現場，即當冷端溫度無法恒定為0度，就需要對儀表的指示值進行修正。做起來容易但誤差較大。
3．補償電橋法較少單獨使用，是利用不平衡電橋產生的電勢來補償熱電偶冷端溫度變化所引起的熱電勢變化值。補償電橋有單獨產品，也有做在儀表內的。
4．補償導線法這是zui常用的方法，即把熱電偶延長把冷端引至溫度較穩定的地方(通常為控制室)，然后由人工來調正冷端溫度，TXR-HF4補償導線特點分析，即把儀表零點調至室溫,或由儀表內電路進行自動補償。對于貴金屬熱電偶把熱電偶延長也是不可能的，因?yàn)閮r格太高行不通，就用熱電特性相近的賤金屬來做延長導線，中間溫度定則是應用補償導線的理論基礎。補償導線并不能自動補償熱電偶冷端溫度的變化，僅只是將熱電偶冷端引至溫度較穩定的地方而已，補償還要由人工和儀表來進行。因此補償導線應該叫做熱電偶延長線，這樣才不會給人造成錯誤的理解。
1.工作溫度：zui高200℃和260℃兩種。
2.zui低環境溫度；固定敷設-60℃；非固定敷設-20℃。
3.zui小彎曲半徑：非鎧裝電纜不小于電纜外徑的10倍，鎧裝電纜不小于電纜外徑的12倍熱電偶補償導線簡稱補償導線，通常由補償導線合金絲、絕緣層、護套、屏蔽層組成。